metal oxide varistors 10d series electronic s circuit prote ct io n system speci?cations are subject to change without notice. please refer to http://www.ruilon.com for current information.
circuit prote ct io n system page:1 speci?cations are subject to change without notice. please refer to http://www.ruilon.com for current information. metal oxide varistors - 10d series features 1. wide operating voltage (v1ma) range from 8v to 1800v. 2. fast responding to transient over-voltage. 3. large absorbing transient energy capability. 4. low clamping ratio and no following-on current. no radioactive material storage temperature: -55oc to +125oc operating temperature: -55oc to +85oc body: nickel plated leads: surface-mount, axial devices: tin plated devices with no leads: nickel plated general characteristics general information the mov-10dxxxk series of 10 mm radial leaded varistor devices protects against overvoltage transients such as lightning, power contact and power induction. the metal oxide varistors offer a choice of varistor voltages from 18 v to 1800 v and vrms voltages from 11 v to 1000 v. the devices have a high current handling, high energy absorption capability and fast response times to protect against transient faults up to rated limits. product name 1 0 d 4 7 1 k disc diameter 10=10mm type d: disk s: square nominal varistor voltage 471=47*10 1 v varistor voltage tolerance k = 10 %
metal oxide varistors - 10d series circuit prote ct io n system page:2 speci?cations are subject to change without notice. please refer to http://www.ruilon.com for current information. electriacl characteristics type number maximum allowable voltage varistor voltage maximum clamping voltage withstanding surge current maximum energy (10/1000s) rated power typical capacitance (reference) standard high surge v ac (v) v dc (v) v 1ma (v) i p (a) v c (v) i(a) standard i(a) high surge (j) standard (j) high surge (w) @1khz(pf) 10d180k 10d180kj 11 14 18(15~21 .6) 5 36 500 1000 2.1 3.0 0.05 5600 10d220k 10d220kj 14 18 22(19.5~26) 5 43 500 1000 2.5 5.0 0.05 4500 10d270k 10d270kj 17 22 27(24~30) 5 53 500 1000 3.0 6.0 0.05 3700 10K330K 10K330Kj 20 26 33(29.5~36.5) 5 66 500 1000 4.0 7.0 0.05 3000 10d390k 10d390kj 25 31 39(35~43) 5 77 500 1000 4.6 9.0 0.05 2400 10d470k 10d470kj 30 38 47(42~54) 5 93 500 1000 5.5 11.0 0.05 2100 10d560k 10d560kj 35 45 56(50~62) 5 100 500 1000 7.0 13.0 0.05 1800 10d680k 10d680kj 40 56 68(61~75) 5 135 500 1000 8.2 15.0 0.05 1500 10d820k 10d820kj 50 65 82(74~90) 25 135 2500 3500 12.0 17.0 0.4 1200 10d101k 10d101kj 60 85 100(90~110) 25 165 2500 3500 15.0 18.0 0.4 1000 10d121k 10d121kj 75 100 120(108~132) 25 200 2500 3500 18.0 21.0 0.4 830 10d151k 10d151kj 95 125 150(135~165) 25 250 2500 3500 22.0 25.0 0.4 670 10d181k 10d181kj 11 5 150 180(162~198) 25 300 2500 3500 27.0 30.0 0.4 560 10d201k 10d201kj 130 170 200(180~220) 25 340 2500 3500 30.0 35.0 0.4 500 10d221k 10d221kj 140 180 220(198~242) 25 360 2500 3500 32.0 39.0 0.4 450 10d241k 10d241kj 150 200 240(216~264) 25 395 2500 3500 35.0 42.0 0.4 420 10d271k 10d271kj 175 225 270(243~297) 25 455 2500 3500 40.0 49.0 0.4 370 10d301k 10d301kj 190 250 300(270~330) 25 500 2500 3500 40.0 54.0 0.4 330 10d331k 10d331kj 210 275 330(297~363) 25 550 2500 3500 40.0 58.0 0.4 300 10d361k 10d361kj 230 300 360(324~396) 25 595 2500 3500 43.0 65.0 0.4 280 10d391k 10d391kj 250 320 390(351~429) 25 650 2500 3500 47.0 70.0 0.4 260 10d431k 10d431kj 275 350 430(387~473) 25 710 2500 3500 60.0 80.0 0.4 230 10d471k 10d471kj 300 385 470(423~517) 25 775 2500 3500 65.0 85.0 0.4 210 10d511k 10d511kj 320 415 510(459~561) 25 845 2500 3500 70.0 90.0 0.4 200 10d561k 10d561kj 350 460 560(504~616) 25 925 2500 3500 70.0 92.0 0.4 180 10d621k 10d621kj 385 505 620(558~682) 25 1025 2500 3500 70.0 95.0 0.4 160 10d681k 10d681kj 420 560 680(612~748) 25 1120 2500 3500 70.0 98.0 0.4 150 10d751k 10d751kj 460 615 750(675~825) 25 1240 2500 3500 70.0 100.0 0.4 130 10d781k 10d781kj 485 640 780( 702~858) 25 1290 2500 3500 80.0 105.0 0.4 130 10d821k 10d821kj 510 670 820(738~902) 25 1355 2500 3500 85.0 110.0 0.4 120 10d911k 10d911kj 550 745 910(819~1001) 25 1500 2500 3500 93.0 130.0 0.4 11 0 10d102k 10d102kj 625 825 1000(900~1100) 25 1650 2500 3500 102.0 140.0 0.4 100 10d112k 10d112kj 680 895 1100(990~1210) 25 1815 2500 3500 115.0 155.0 0.4 90 10d182k 10d182kj 1000 1465 1800(1620~1980) 25 2970 2500 3500 133.0 250.0 0.4 70
circuit prote ct io n system page:3 speci?cations are subject to change without notice. please refer to http://www.ruilon.com for current information. metal oxide varistors - 10d series electrical rating ltem test condition / description requirement varistor voltage the voltage between two terminals with the speci?ed measuring current 1ma. dc applied is call vb. to meet the speci?ed value maximum allowable voltage the recommended maximum sine wave voltage (rms) or the maximum dc voltage can be applied continuously. rated wattaget the maximum average power that can be applied within the speci?ed ambient temperature. ienergy the maximum energy within the varistor voltage change of 10% when one impulse of10/1000sec. or 2 msec. is applied. withstanding surge current the maximum current within the varistor voltage change of 10% with the standard impulse current (8/20sec.) applied one time. surge life the change of vb shall be measured after the impulse listed below is applied 10,000 times continuously with the interval of ten seconds at room temperature. 5d series 180k to 680k 10a (8/20sec.) 820k to 751k 20a (8/20sec.) 7dseries 180k to 680k 25a (8/20sec.) 820k to 821k 50a (8/20sec.) 10d series 180k to 680k 50a (8/20sec.) 820k to 182k 100a (8/20sec.) 14d series 180k to 680k 75a (8/20sec.) 820k to 182k 150a (8/20sec.) 20d series 180k to 680k 100a (8/20sec.) 820k to 182k 200a (8/20sec.) vb vb <+10% _
metal oxide varistors - 10d series circuit prote ct io n system page:4 speci?cations are subject to change without notice. please refer to http://www.ruilon.com for current information. packaging part number component package quantity packaging option packaging speci?cation 10d 10.0 500 box 1000 current energy and power dissipation ratings should transients occur in rapid succession, the average power dissipation is the energy (watt-seconds) per pulse times the number of pulses per second. the power so developed must be within the speci?cations shown on the device ratings and speci?cations table for the speci?c device. the operating values of a mov need to be derated at high temperatures as shown above. because varistors only dissipate a relatively small amount of average power they are not suitable for repetitive applications that involve substantial amounts of average power dissipation. 10 0 90 50 10 o 1 t t 1 t 2 time percent of peak va lue 0 1 t 1 t 2 example s current wa ve form: 8 1 20 2 10 0 90 80 70 60 50 40 30 20 10 0 -555 06 07 08 09 01 00 11 01 20 13 01 40 15 0 ambient tempe ra ture ( o c) percent of ra ted va lue figure 1a - po wer derating for epoxy coa te d figure 2 10 0 90 80 70 60 50 40 30 20 10 0 -555 06 07 0809 01 00 11 01 20 13 01 40 15 0 ambient tempe ra ture ( o c) percent of ra ted va lue figure 1b - po wer derating for pholenic coa te d peak pulse current test waveform
circuit prote ct io n system page:5 speci?cations are subject to change without notice. please refer to http://www.ruilon.com for current information. metal oxide varistors - 10d series package dimensions storage conditions: 1. storage temperature: -10c~+40c 2. relative humidity:75%rh 3. keep away from corrosive atmosphere and sunlight. period of storage: 1 year warehouse storage conditions of products d k<3.0 d1 d1 h1 l1 d1 k<3.0 table 2 model t(max.) model t(max.) 180k 4.5 221k 4.5 220k 4.6 241k 4.6 270k 4.7 271k 4.9 330k 4.9 301k 5.0 390k 4.8 331k 5.1 470k 4.9 361k 5.2 560k 5.0 391k 5.4 680k 5.2 431k 5.7 820k 4.1 471k 6.0 101k 4.3 511k 6.2 121k 4.5 561k 6.5 151k 4.8 621k 6.4 181k 4.3 681k 6.5 201k 4.4 751k 6.5 table 1 symbol dimensions h(max.) 12.0 h1(max.) 13.5 l(min.) 20.0 l1(min.) 15.0 d(max.) 9.0 d1(0.8) 5.0 t(max.) table 2 d(0.05) 0.6 d1(0.4) 1.2 unit:mm
circuit prote ct io n system page:6 speci?cations are subject to change without notice. please refer to http://www.ruilon.com for current information. ruilongyuan electronics co., ltd. reproducing and modifying information of the document is prohibited without permission from ruilongyuan international inc. ruilongyuan international inc. reserves the rights to make changes of the content herein the document anytime without noti?cation. please refer to our website for the latest document. ruilongyuan international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ruilongyuan international inc. does not assume any and all implied warranties, including warranties of ?tness for particular purpose, non-infringement and merchantability. applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications.ruilongyuan international inc. makes no representation or warranty that such applications will be suitable for the specifed use without further testing or modifcation. the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment,aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fullyindemnify ruilongyuan international inc. for any damages resulting from such improper use or sale. tel: +86-755-8290 8296 fax: +86-755-8290 8002 e-mail: jack@ruilon.com
|
